Hi, I'm new and this is my first post :)
I have a 1990 mk2 golf driver 1600cc cab 55 Kw EZ 75HP , just before the 1800cc came out.
I've been doing my head in about 2 little things and hope someone can confirm, TY.
First, on the plastic cover that fits on top of the cab, mine doesn't have a round joint in between the part that fits on carburetor ( round). Is this normal ? i made loads of research and seems it doesn't have one from factory and usually is for 1.1-1.3 models only ?
Second the air filter housing secure rubber at the begining of the hole airfilter box is broken and i'm lookimg everywhere for a replacement. This model has one that only screws on one side and then the other side is a metal curved ring that fits and holds on the airbox ring. All i could find is the standart one with two threads that of course will not fit ! Any ideas where i can buy this ?
Thank you for all your advices,
Phil.
Try posting a photo. I can’t make sense of your post.
Hi, ty, yes i knew it was a bit confusing. So first picture is what i bought on e-bay, problably wrong, as you can see, it's got a joint inserted in the cab cover, mine doesn't and seems it does not need one for a Golf mk2 Driver ?. The second pic is about holding the full airbox. I got this part but it's not the right one as it's got 2 screws,... And mine only got one with the rubber as per photo of what i need ?
if it makes sense ??
Sounds dumb but how can i dowload pics in here ? I have no clue ty
i meant from my pc as all i can see is insert an image option and it doesnt's want to post? Thank you.
To post a photo you have to save the photo on a hosting web site, then post the web link.
Thank you very much ! I shall do this shortly,...
I trust i did it right this time and hope you will be able to rest my mind on these small issues. Thanks again, Phil.(https://ibb.co/vCgh2Yzr https://ibb.co/tpTsfwDC https://ibb.co/7tmbcLHD https://ibb.co/0jj3QnwK)
(https://ibb.co/vCgh2Yzr)
https://ibb.co/vCgh2Yzr
https://ibb.co/tpTsfwDC
https://ibb.co/7tmbcLHD
https://ibb.co/0jj3QnwK
This is what it should look like
https://www.flickr.com/photos/24255527@N00/2728648726
Note the metal clip holes the back piece to the top of carb. If you have a Weber, it bolts on to the carb through the small round hole. The front piece clips to the rear piece and the rubber bit bolts to a metal bracket
thank you all, as i said all the pictures are from the hole part i bought on ebay as i needed a few compatible bits, not actually mine.
My car looks 100% as the photo you posted Keekster64. The second photo aslo from e-bay and noticed the rubber ring in it. Mine doesn't have it so it's normal as i got the orginial pietsburg cab as explained again by Keekster, thank you again !
Finally, i looked everywhere for the piece with the rubber that holds the front of the box ( picture 1 ). Where can i buy it if possible ???, i looked everywhere and ended getting picture 4. I guess i could always cut one side ?
Thanks again, Phil.