Good evening!
I finally picked up my 1990 GTI 8v.
On Saturday i drove down to Enniskillen, NI and picked up the car i had been waiting all Christmas for (joys of missing V5c and a pandemic in Swansea/The World...)
This is the face of a 31yr old man finally driving his boyhood dream car!
(https://i.ibb.co/7CBdPLC/50797198442-69e33b5fd5-h.jpg) (https://ibb.co/Jt8wVgt)
I made the 1.5hr drive home to Belfast, where the car was amazing... didn't miss a beat mechanically.
However, it was in this time i started to take note of things that will need attention.. but I'll share the list later on :o
Once home, i set about sorting out little things that i had already prepped for from my initial viewing of the car.
1. Changed the weird new style GTI badge to the original one.. (cant work out how someone put it on and stepped back and went - yes that's better than the original.. but hey ho, sorted it now)
Before:
(https://i.ibb.co/PYxK9sW/50797205746-eb42b2d942-o.jpg) (https://ibb.co/8BMqdnx)
After:
(https://i.ibb.co/vxbVN37/50797313782-71219114b3-k.jpg) (https://ibb.co/zh1Q3Xy)
2. Changed the "leather" gear knob to a golf ball style one
3. Added a button blank to the dash as there was one missing randomly
4. Fitted roof bars and my bike rack for test fitting (sourced from P'Boro and couriered by my Dad in Ely)
5. Finally, my grandfather passed away this year, and when cleaning out his garage (he was car/plane mad) i found his old AA badge - so that went on the grille as a little memory to him 8)
Here's how its sitting now. (excuse the dirt haha)
(https://i.ibb.co/WHrpCQX/50797313797-c374cd170d-c.jpg) (https://ibb.co/FhQqp91)
On the to do list:
1. fix blower motor - the fan stopped on the way home. Removed it and cleaned up the connections on fan to resistor - worked for a bit.. also the connection to resistor seems slack and the fan works on and off if that connection is wiggled, any tips would be great thanks.
2. Squealing noise randomly at low speeds - intermittent again.. thinking something PAS related
3. Air Filter upgrade
4. Digifant tune using the guide.
5. Change the radio to a 90's Panasonic cassette player to get it back to its roots.
6. Fit Immobiliser/Alarm
7. Weighted Shift rod ordered - to fit.
8. Headlight Loom upgrade
9. Suspension drop -30mm with Eibach springs and Bilstein shocks.
But yeh, i'll try to keep this updated - you can also follow me on Instagram on kwp_gti ;)
The forums great, and i'll be asking questions galore O:)
Great little project you've got there, I love the nod to your dad too.
looks great. welcome to the club
1. fix blower motor - could also be the switch
2. Squealing noise randomly at low speeds - most likely PAS or Alternator belt, adjust but ideally replace the V-belts, you might need to clean up the pulleys so there's no rust.
7. Weighted Shift rod ordered - to fit. - a gear selector bush kit is always a good thing to do too, to tighten up the gear change
8. Headlight Loom upgrade - also disconnect the yellow dim/dip resistor if it's still attached (https://www.vwgolfmk2.co.uk/clubforum/index.php?topic=50.0)
I saw this up for sale, looked a nice car, welcome, there are a few guys around Belfast with MK2's that can help with things.
Evening!
So tonight was all about getting my boot lock to work. turns out the central locking pin wasnt sliding smoothly so would stick.
I Pulled apart and greased it up a good'un. Works like a charm now on the central locking
While I was back there I reattached the rear washer pipe.. I needed to use some ingenuity.. adios tyre foam thing.. the plastic pipe was perfect to make it fit properly on the jet ..
Finally in the engine bay I fitted the weighted shift rod yesterday.. pictures included now
Also replaced the coolant temp sensor, the temperature gauge still doesn't work..
So that needs investigating.. bugger...
Finally I was advised to remove the dim/dip resistor to improve the headlight output.. so done that, thanks
@Eddypeck :)
but also have a headlight loom ordered to increase voltage to bulbs
Also fitted a K&N air filter but forgot to take photos again 🤦
(https://i.ibb.co/0jth6QD/IMG-20210105-194804.jpg) (https://ibb.co/bgJzC7W)
(https://i.ibb.co/drF8X5Z/IMG-20210105-194822.jpg) (https://ibb.co/G0yzG5m)
(https://i.ibb.co/0YLtSFb/IMG-20210105-194906.jpg) (https://ibb.co/xzbH0fT)
(https://i.ibb.co/DWdKZ0M/IMG-20210105-205901.jpg) (https://ibb.co/54ZcPbj)
(https://i.ibb.co/BKypgT0/IMG-20210105-210746.jpg) (https://ibb.co/QjPg6Yy)
(https://i.ibb.co/W03GwVN/IMG-20210105-210753.jpg) (https://ibb.co/ZSJGP2R)
Photo of a Tesco car park.
(https://i.ibb.co/NSGrYR1/IMG-20210104-211117-136.jpg) (https://ibb.co/5FJkcZY)
looks great. welcome to the club
1. fix blower motor - could also be the switch
2. Squealing noise randomly at low speeds - most likely PAS or Alternator belt, adjust but ideally replace the V-belts, you might need to clean up the pulleys so there's no rust.
7. Weighted Shift rod ordered - to fit. - a gear selector bush kit is always a good thing to do too, to tighten up the gear change
8. Headlight Loom upgrade - also disconnect the yellow dim/dip resistor if it's still attached (https://www.vwgolfmk2.co.uk/clubforum/index.php?topic=50.0)
Thanks for this, I'll check the switch as well, however the connection to resisitor feels loose and when wiggled it can make it work.. I was out with a friend yesterday and had to ge him to move the connection to get it working.
It's booked in for a full service with belts next week so will get the pulleys and stuff all checked
Do you have a link for the bush repair kit? I found a full set on VWH parts but includes shift rods
Tried the resistor removal.. will see what it does
Keep the knowledge coming
@Eddypeck , I really appreciate it
I saw this up for sale, looked a nice car, welcome, there are a few guys around Belfast with MK2's that can help with things.
Cheers mate, she's clean, obvious few things need sorted, I think I got lucky.. a friend's at DSM Autos in Belfast checked it and was really impressed with it 👍
Must try and get in touch with the Belfast guys, any names on here?
Re the temp sensor.
If the issue is with the temp guage in the car it is the black sensor that you may need to change. B+B on ebay sell them and give great service/delivery. Not sure about to Belfast tho.
I think the blue one is to do with the mixture etc. My blue sensor failed and caused havoc making the car undrivable.
Re the temp sensor.
If the issue is with the temp guage in the car it is the black sensor that you may need to change. B+B on ebay sell them and give great service/delivery. Not sure about to Belfast tho.
I think the blue one is to do with the mixture etc. My blue sensor failed and caused havoc making the car undrivable.
Balls. Well sure I've got the blue one installed haha can't be a bad thing, I've got the black one ordered already on Eurocarparts but will check etka online tomorrow for different part numbers and source one asap :)
Someone said it was the blue one and I thought I'd read it somewhere.. obviously wrong.. eff sake haha
Re the temp sensor.
If the issue is with the temp guage in the car it is the black sensor that you may need to change. B+B on ebay sell them and give great service/delivery. Not sure about to Belfast tho.
I think the blue one is to do with the mixture etc. My blue sensor failed and caused havoc making the car undrivable.
Just checked etka online. The black one is called "temperature sensor
for coolant temperature gauge"
Haha so yeh should have looked at this before ordering lol
B&B on ebay also for the gear selector bush kit. The full kit does come with replacement rods, but I have a weighted shift rod and some solid metal selector rods.
(https://eddypeck.files.wordpress.com/2020/02/2020-02-08-15.07.jpg)
B&B on ebay also for the gear selector bush kit. The full kit does come with replacement rods, but I have a weighted shift rod and some solid metal selector rods.
(https://eddypeck.files.wordpress.com/2020/02/2020-02-08-15.07.jpg)
thanks, do you have a link for this seller?
all i can find is some sofa company in italy lol
I know Gas n Gears used to make them, unsure if they still are, but worth looking him up on Facebook.
The guy behind them has been playing with vw gearboxes for over 20 years!
thanks, do you have a link for this seller?
all i can find is some sofa company in italy lol
This is the eBay seller I got them from.
https://www.ebay.co.uk/sch/beefjerkey22/m.html?_nkw=&_armrs=1&_ipg=&_from=
I bought some years ago for my previous mk2 so when I got this one in 2019 I chased him up for some more. He no longer lists them on ebay, had some issues I belive but he was still happy to send some out. They're around £30 I think, can't remember exactly. The Gas'n'Gears ones are if you can get them are a work of art, but last time I looked were about £150 and I can't justify this.
I saw this up for sale, looked a nice car, welcome, there are a few guys around Belfast with MK2's that can help with things.
Cheers mate, she's clean, obvious few things need sorted, I think I got lucky.. a friend's at DSM Autos in Belfast checked it and was really impressed with it 👍
Must try and get in touch with the Belfast guys, any names on here?
Check out the Facebook group Attention Seekers NI, I know a few of them on there, https://www.facebook.com/groups/613851435774818
Car looks great.
I had the same problem with my heater fan, moving the connector/ cable to get it working and the fault was the resistor pack. Bought a new resistor from B & B components.
Car looks great.
I had the same problem with my heater fan, moving the connector/ cable to get it working and the fault was the resistor pack. Bought a new resistor from B & B components.
I think this is the way it's going for me tbh, trying to source the resistor is proving awkward for some reason... Many of them seem to state LHD.. is that important or I'm guessing they're not sided?
Re the temp sensor.
If the issue is with the temp guage in the car it is the black sensor that you may need to change. B+B on ebay sell them and give great service/delivery. Not sure about to Belfast tho.
I think the blue one is to do with the mixture etc. My blue sensor failed and caused havoc making the car undrivable.
Changed the black coolant temperature sensor tonight, nothing changed..
Guessing next step is to check dash connections.
The fuel gauge also doesn't work so will hopefully get both fixed in one go..
I honestly despise the electrical checking etc... I have no real experience with that
Link to B&B aka tierod69 (https://www.ebay.co.uk/usr/tierod69)
Another white MK2... if it weren't for the indecently good looking driver in your picture, it'd be like looking in the mirror!
Health to enjoy it, I'm not a million miles away - just beyond Antrim.
Car looks great.
I had the same problem with my heater fan, moving the connector/ cable to get it working and the fault was the resistor pack. Bought a new resistor from B & B components.
I think this is the way it's going for me tbh, trying to source the resistor is proving awkward for some reason... Many of them seem to state LHD.. is that important or I'm guessing they're not sided?
Yes it's a nightmare trying to get a RHD resistor as no one could confirm if the LHD would fit a RHD car and I didn't want to take a risk and buy one. Eventually I came across a new one from B & B components but I've just looked and it's not coming up at the moment. Might be worth contacting them about availability? VW Golf GTI mk2 heater fan resistor C392.
Another white MK2... if it weren't for the indecently good looking driver in your picture, it'd be like looking in the mirror!
Health to enjoy it, I'm not a million miles away - just beyond Antrim.
I've been reading your thread thoroughly! I didn't realise you were in NI, yours is substantially cleaner and more original looking than mine!
I may be askin to see yours in person haha
Changed the radio from an ugly Kenwood cd player to a an 80s Panasonic tape player
(https://i.ibb.co/sHRf8cD/IMG-20210110-152536.jpg)
The speakers all need upgraded now, also have a Panasonic amp to attach to it along with matching Panasonic Passive crossovers that were fitted to Malcolm Young's (AC/DC) Jaguar... 🎸
Also fitted bonnet struts this morning.
Bonnet sits a little higher but the improvement is massive (unsure what the mark on the bonnet is.. need to check that)
(https://i.ibb.co/8x0PY1T/IMG-20210110-104303.jpg)
And this morning was spent tracking down why my fuel gauge and temp gauge don't work.. already changed the temp sender and not working.. dash has been out and contacts cleaned, had the fuel sender out and cleaned up the contacts there.. there's continuity going through it but none in the circuit to the sender.. think it's the earth so trying to source the issue...
(https://i.ibb.co/jR7JkZw/IMG-20210110-084217.jpg)[/url]
(https://i.ibb.co/wpX8hQC/IMG-20210110-084224.jpg)
(https://i.ibb.co/D7nHPHx/IMG-20210109-093316.jpg)
(https://i.ibb.co/HGynGfv/IMG-20210107-155429.jpg)
The search for the earth issue continues..
Needs a good clean now and to get fixed before settling up for the week
Also got an 8 ball fitted 🤘
(https://i.ibb.co/vm3vt2L/IMG-20210107-204250.jpg) (https://ibb.co/Y8cTrvf)
I've got an 8 ball too! You can tell its the real thing 'cos it's a bit cold now it's winter. I've swapped it for the 'original'....might come back out when it gets warmer!
I also have a mucky "go faster" stripe on the underside of my bonnet. Assume its cr4p off the aux drive belts.
I've got an 8 ball too! You can tell its the real thing 'cos it's a bit cold now it's winter. I've swapped it for the 'original'....might come back out when it gets warmer!
Yep, definitely colder than the golf ball I bought from VWH... mines also real as you can see in the screw haha
Any idea how to keep the gaiter up?
I'm afraid not. I've got a leather gaiter I hand stitched years ago. Internal stitches to hide my poor sewing. It replaced the fabric one which was disintegrating.
Could you use one of your spare temp sensor rubber seals round the top of the gear stick but under the gaiter if you know what I mean? A bit like you'd twist an elastic band that was too long.
Bit of a bodge..but out of sight.
I'm afraid not. I've got a leather gaiter I hand stitched years ago. Internal stitches to hide my poor sewing. It replaced the fabric one which was disintegrating.
Could you use one of your spare temp sensor rubber seals round the top of the gear stick but under the gaiter if you know what I mean? A bit like you'd twist an elastic band that was too long.
Bit of a bodge..but out of sight.
Smart. Very smart... I was playing with this o ring earlier thinking what to do with it haha
If it works, I owe you a beer
firstly
@AndyBa i owe you a beer - took of the gaiter and surround, doubled up the ring on the stick and put the gaiter back on.. looks like it just left the factory.. kind of haha :D
I FOUND THE EARTH ISSUE!
earth pin in the fusebox on K/11(if i remember correctly) had come loose.. pushed it in 2mm and it's Lol working now 👍
THAT BLOODY BLUE AND BROWN WIRE!
(https://i.ibb.co/XthjPqn/20210111-113840.jpg) (https://ibb.co/2dDWrTz)
Fuel gauge is working a treat now!
Still holding off on the suspension setup .. thinking it'll be a sunny weather purchase and job when I can bothered to change it all haha
Update on everything.. (need proper photos)
Installed the instrument cluster again.. but the clocks not playing ball so it's either 1 of 2 things. either the screen is in upside down or the screen is not for the MFA screen I have..(the removal of this dash is becoming second nature now haha this'll be the 3rd time)
(https://i.ibb.co/GQ7STYq/IMG-20210111-201830.jpg) (https://ibb.co/XxXR80q)
Also have ordered the LED upgrades from 'crazyleds' for the interior car lights (dash, switches and fan control), staying green but will mean just making things last a bit easier to read.. apparently..
Also while I had the screen out, I had to solder a connection on one of the cluster bulbs.. so while that was out and hot I decided to fix my blower motor which only had on or off.. had bought some (5 just in case) thermal fuses as they blow meaning it can't resist the power input (hence the lack of fan speeds..) needed to be careful as they can blow under the soldering iron heat.. had a go, plugged it all back in and SUCCESS.. I HAVE ALL THE SPEEDS 💪 however the connection between resistor and fan is dodgy so needs a wiggle every so often.. next thing to fix haha
(https://i.ibb.co/DLG079G/IMG-20210111-165843.jpg) (https://ibb.co/KmNT92N)
Headlight loom has been fitted! Absolutely delighted with the upgrade! It only does the dipped beams but it's already a massive improvement with the night breaker bulbs 🤘
Plate holders to be fitted...
(https://i.ibb.co/5jX8zVq/IMG-20210112-110117.jpg) (https://ibb.co/PWshb8B)
Also sneak peek of some things to come...
(https://i.ibb.co/2PDGJ41/IMG-20210112-110133.jpg) (https://ibb.co/zbyqdvT)
need a leather repair/clean - but have always wanted a Momo/Sport steering wheel in a car (teenage Dave is excited haha)
(https://i.ibb.co/GTvLxbh/IMG-20210112-115538.jpg) (https://ibb.co/bJgZW8f)
I saw
@Dalj thread on his R32 - and his auto antenna was so cool! so i picked up an ebay absolute bargain and will have a play with that!
and finally, the 80's Panasonic Amplifier that will go with my Panasonic radio (apparently this was fitted to Malcolm Young of AC/DC fame, Jaguar XJ...) also have some Panasonic Passive crossovers coming as well 8)
(https://i.ibb.co/gMnc4mb/IMG-20210112-110208.jpg) (https://ibb.co/Z6Zb2GR)
Will update again soon,
Peace
If your fuel and temp gauges are still acting a bit weird, I suggest you check your 10V source to the temp sensor which is regulated by the small regulator behind the clock. It could work but it can be regulating a weaker voltage or maybe even higher and then you get non-trusted readings from gauges. Mine was completely broken which resulted in non-functioning temp & fuel gauges. The voltage should be from 9.5V to 10.5V.
Time for an update.
Plenty has been done - scrolling through my phone to get a time line of events... since my last input i have bailed on the repaired resistor - and bought a new one which fits on the connector better - no issues with the fan at all now.
so - i have repaired my MOMO wheel.. using a leather steering wheel repair kit from amazon. Would highly recommend, taking time to complete each step is a good way to do things.
Before
(https://i.ibb.co/hRPPF19/IMG-20210112-110133.jpg) (https://ibb.co/0jggyV2)
Kit used
(https://i.ibb.co/xhQXbjQ/IMG-20210116-095128.jpg) (https://ibb.co/G7jnD2j)
During
(https://i.ibb.co/1MfnRJC/IMG-20210205-181425.jpg) (https://ibb.co/68RZDJK)
After
(https://i.ibb.co/KyB2sgh/IMG-20210206-090442.jpg) (https://ibb.co/4NC8SLt)
Chuffed with the results - really happy.
also went one step further and found the paint codes for the MOMO Yellow (Traffic Yellow RAL1023) and Red (Traffic Red RAL 3020 for anyone wondering) - bought small paint pots and filled them in to make the wheel feel completely new. this was the moment where I understood why
@L90E goes into so much detail with his build, its well worth those little details
I also got a proper screen for the MFA and replaced that, whilst i was doing that as well i got the LEDS completed on my cluster and dash as well. Replaced the LEDS in the Rear Demist Switch, Fog Light, Headlight switch and also the heater control panel
(https://i.ibb.co/V2qRYmB/IMG-20210119-104111.jpg) (https://ibb.co/vZjp4Yz)
(https://i.ibb.co/pbdRym7/IMG-20210119-104029.jpg) (https://ibb.co/bQX2Jf0)
(https://i.ibb.co/WGRVHjx/IMG-20210119-104058.jpg) (https://ibb.co/gmc4rhj)
New LEDS and wheel installed.
(https://i.ibb.co/09kmMBD/IMG-20210206-165532.jpg) (https://ibb.co/WzQGyDx)
also the car was away getting an immobiliser fitted, when back i installed new front speakers, also picked up some AKTIV speaker grills, had to get the rubber grommets to hold speaker = fitted the tweeters included into the dash speaker locations. mounts made from MDF (no pictures of this)
(https://i.ibb.co/rt9bFVL/IMG-20210118-174428.jpg) (https://ibb.co/dcZbjR3)
not a massive ICE person - so these do the job, also got the matching kit for the rears and fitted those - the radio however is only 2 channel.. so in comes the Panasonic Car Compo Amp.. (40w+40w)
(https://i.ibb.co/br6C1hv/IMG-20210215-200451-535.jpg) (https://ibb.co/551STDj)
(https://i.ibb.co/Cbf1PGZ/IMG-20210218-174342.jpg) (https://ibb.co/T4svW3S)
installed in the tray below glovebox - drilled holes in back of this and wired into the radio with Panasonic 8 pin connector - this now powers the rear speakers. its not the prettiest, and certainly not the most powerful, but it does what i need an I'm really happy with it
ive also been playing around with how to control the Antenna i will install - i want to be able to control it going up and down without having to turn radio on and off. this is my latest 'protoype'
There is a Japanese spec dash switch for the antenna but it is pretty common actually as hens teeth.
(https://i.ibb.co/T0ppfbW/IMG-20210201-174830.jpg) (https://ibb.co/hdhh6ZY)
Its not massively OEM - but in theory it will allow me to control it while radio is on.
New badges on the back - 8v OEM style badge from Trimsports..
(https://i.ibb.co/sQ2Tdd5/IMG-20210206-165631.jpg) (https://ibb.co/wCRnFFJ)
also got the same badge and whacked it on t3he glovebox (you can see it earlier on)
my most recent venture is VDO gauges - i bought an Oil Pressure gauge and sender.. then was 'gifted' a set of VDO Night Dial gauges from my Father in Law.. now to add to this I wanted to keep my radio and had found a way of installing gauges into where the ashtray is.. however the plastic mount from AwesomeGTI felt expensive (the shipping to NI from Manchester was about £8 weirdly) and that didn't sit well with me.. however someone on the facebook (apologies if someone on here as well) noted that there was a metal one that was almost OEM look/feel.. tracked it down to GAK Motorsports. However he will not post internationally because he cant be bothered (fair enough) so step forward American friends. ordered online to a friend in Ohio who then got it 2 days later and packed it and posted to me
Aluminium GAK Gauge panel + posting to Belfast from USA $35 =
£25Plastic AwesomeGTI Panel + posting to Belfast
£35mental.
the outcome of this was well worth it.
(https://i.ibb.co/XsvvbSK/IMG-20210218-195426.jpg) (https://ibb.co/Lt228nc)
(https://i.ibb.co/1qcSLNp/IMG-20210218-195422.jpg) (https://ibb.co/T8yCkGn)
(https://i.ibb.co/f1TGprS/IMG-20210218-195040.jpg) (https://ibb.co/r7Xf65t)
excuse the mismatch of gauges - unfortunately the night dial gauges done fit all in this location because of their bezels.. made do with the Audi 80 Oil Pressure Gauge in the middle - still figuring out how to make sure its working.. but that's another story.
oh and my data sticker was old and worn - so id seen the posts about the German eBay guy who makes them - however I thought i could do it myself, I'm handy enough on graphic design...
this is my data sticker redone.. needs corners trimmed
(https://i.ibb.co/rZNgPCq/IMG-20210210-202501-548.jpg) (https://ibb.co/8jtJ3WG)
apologies for the long one.
if you're on Instagram follow me @gt_aye_ni
Someone's been busy!
Momo transformation is startling, well done. The standard wheel is probably the only iffy part of MK2's for me. Don't think I've ever kept the original on, even when I was driving them back in the 80/90's.
Brave man tackling the MFA display, not sure I'd have the courage but very good to know it can be done if the need arises. Wonder why they seem to be so susceptible to failing, just old tech?
The illumination on some of my switches is quite dim, be interested in a 'how to' if you have the time. Tried opening up some old spare window switches, but couldn't get them to go back together properly again.
The Night Design VDO's are quite hard to come by in the UK, less so in Germany but now proving difficult to get sent here unfortunately.
They're unusual for VDO's in that the bezels will twist off if you're very, very, very careful.
Long time ago saw some 'Oettinger' branded VDO's up for grabs on eBay, went for what was big money back then and now you know how it was done!
Good work on the data sticker, looks very authentic. If you look into the factory equipment / option codes you could tailor it to match any additions you've made to your car.
There's a corresponding sticker for the log owners service shedule, be an added touch maybe?
Someone's been busy!
Momo transformation is startling, well done. The standard wheel is probably the only iffy part of MK2's for me. Don't think I've ever kept the original on, even when I was driving them back in the 80/90's.
Brave man tackling the MFA display, not sure I'd have the courage but very good to know it can be done if the need arises. Wonder why they seem to be so susceptible to failing, just old tech?
The illumination on some of my switches is quite dim, be interested in a 'how to' if you have the time. Tried opening up some old spare window switches, but couldn't get them to go back together properly again.
The Night Design VDO's are quite hard to come by in the UK, less so in Germany but now proving difficult to get sent here unfortunately.
They're unusual for VDO's in that the bezels will twist off if you're very, very, very careful.
Long time ago saw some 'Oettinger' branded VDO's up for grabs on eBay, went for what was big money back then and now you know how it was done!
Good work on the data sticker, looks very authentic. If you look into the factory equipment / option codes you could tailor it to match any additions you've made to your car.
There's a corresponding sticker for the log owners service shedule, be an added touch maybe?
Thanks! Really happy with the MOMO wheel now, probably could do with being done again now I'm using it.. haven't noticed random rough spots.
The MFA display I believe is just ok tech, the screen bleeds..
@L90E I can give you a walkthrough on replacing if you ever need it.. let me know. It was different to all how tos as the clocks were different..
The led switches was a bit of a faff.. I can do one better and send you over some details as well with all how to do it 👍👍
Thanks on the sticker, I've realised I've done a tweak since this photo but yeh need to see if there's anything I can add..
And no wasn't aware of the log owners sticker?? Have you a photo of this?
There's a corresponding sticker for the log owners service shedule, be an added touch maybe?
Inside the first page of the service book.
[/quote]
Thanks! Really happy with the MOMO wheel now, probably could do with being done again now I'm using it.. haven't noticed random rough spots.
The MFA display I believe is just ok tech, the screen bleeds..
@L90E I can give you a walkthrough on replacing if you ever need it.. let me know. It was different to all how tos as the clocks were different..
The led switches was a bit of a faff.. I can do one better and send you over some details as well with all how to do it 👍👍
Thanks on the sticker, I've realised I've done a tweak since this photo but yeh need to see if there's anything I can add..
And no wasn't aware of the log owners sticker?? Have you a photo of this?
[/quote]
It's possible LR Discovery MK1 (Part # AMR2496) have the same window switches as the MK2.
If they have green illumination, they're still available new for small money and would be an easy fix... yet to look any further into that though, maybe someone else already has?
The log book sticker is just the boot one with some detail removed.
(https://lirp-cdn.multiscreensite.com/521a0932/dms3rep/multi/opt/Service+Shedule-960w.jpg)
If you're finding the leather dye is rubbing through give it a coat of Fiebings Resolene, comes in clear or black, and seals it in.
It's possible LR Discovery MK1 (Part # AMR2496) have the same window switches as the MK2.
If they have green illumination, they're still available new for small money and would be an easy fix... yet to look any further into that though, maybe someone else already has?
The log book sticker is just the boot one with some detail removed.
(https://lirp-cdn.multiscreensite.com/521a0932/dms3rep/multi/opt/Service+Shedule-960w.jpg)
If you're finding the leather dye is rubbing through give it a coat of Fiebings Resolene, comes in clear or black, and seals it in.
Now I don't have electric windows.. so I don't have to worry about that haha
if you would like the info on how to change the LED's and also how to do the MFA clock drop me a PM and i can get some info over to you bud
also
@L90E if you could measure the log book sticker - id be grateful and can get one made :D
Log book sticker is W - 88mm. H - 75mm
A bit down the list of things to do, so no rush, but if you could send how to's for both replacing the switch bulbs and the MFA that would be great, thanks.
I need to get out too, on one you have 8U0 and the other 3U0, OCD alert!!
I need to get out too, on one you have 8U0 and the other 3U0, OCD alert!!
Effffff sake...! I've spent to long staring at these theyve all blended! Haha
🙈🙈🙈
@t2000 there was also another, I'm embarrassed so just deleted the message haha
I have finally completed these stickers.. albeit I could have just ordered from Germany, but I needed something to entertain me at the moment!
(https://i.ibb.co/pXVPZvh/nor.jpg)
Old one
(https://i.ibb.co/Bwj8CX9/IMG-20210210-202123.jpg)
The font is a direct copy of the original that I made from scratch.. also measurements and are pulled from my sticker.
Basically too much detail went into this thing.. but im happy with the result..
@t2000 pointed out a mistake, sorted and now here it is 🤘🤘
Also i fitted my t piece and sender to the engine.. I'm starting to lose my cool with these gauges and lose sight of their use.. I've never felt so defeated by something..
T piece in and VW sender with VDO sender in, plugged in and still showing full 5 on the gauge when car up to full temp... Tried everything, seems the senderaybe isn't earthed correctly or the guage wiring is dodgy.. but the other 3 work fine and the earth etc is in unison as per this image..
(https://i.ibb.co/MSvrR16/vdogauges2.png)
Here's to trying again..
Hey in regards to your dash led upgrade did you have to replace the original circuit board or just modify it?
Hey in regards to your dash led upgrade did you have to replace the original circuit board or just modify it?
Hi, I haven't used this in a long time.. must get some updates in..
The LED dash upgrade is the original circuit boards.. give me a PM and I can try and explain better maybe?