Bell Housing Cover Plate August 16, 2021, 06:53:58 AM Hello all. I have just bolted by box and lump back together fr the re install on Friday (hoary), i have fitted the backing lpate to the block with the three bolts around the crank seal housing , and also the lower plate that bolts onto the box itself with two bolts, this covers the opening to the back of the clutch at the bottom. On the back of the engine there is still a small section (near the drive flange) where i can see the back for the clutch so I assume I am missing a small cover - can anyone advise please? Phil
Topic: Bell Housing Cover Plate (Read 343 times)
previous topic - next topic
