Skip to main content ↑ ↓
Topic: Golf Driver 1600cc 1990 carburator top cover ( airbox) (Read 95 times) previous topic - next topic

Golf Driver 1600cc 1990 carburator top cover ( airbox)

Hi, I'm new and this is my first post :)
I have a 1990 mk2 golf driver 1600cc cab 55 Kw EZ 75HP , just before the 1800cc came out.
I've been doing my head in about 2 little things and hope someone can confirm, TY.

First, on the plastic cover that fits on top of the cab, mine doesn't have a round joint in between the part that fits on carburetor ( round). Is this normal ? i made loads of research and seems it doesn't have one from factory and usually is for 1.1-1.3 models only ?

Second the air filter housing secure rubber at the begining of the hole airfilter box is broken and i'm lookimg everywhere for a replacement. This model has one that only screws on one side and then the other side is a metal curved ring that fits and holds on the airbox ring. All i could find is the standart one with two threads that of course will not fit ! Any ideas where i can buy this ?

Thank you for all your advices,

Phil.

Re: Golf Driver 1600cc 1990 carburator top cover ( airbox)

Reply #1 –
Try posting a photo. I can’t make sense of your post.

Re: Golf Driver 1600cc 1990 carburator top cover ( airbox)

Reply #2 –
Hi, ty, yes i knew it was a bit confusing. So first picture is what i bought on e-bay, problably wrong, as you can see, it's got a joint inserted in the cab cover, mine doesn't and seems it does not need one for a Golf mk2 Driver ?. The second pic is about holding the full  airbox. I got this part but it's not the right one as it's got 2 screws,... And mine only got one with the rubber as per photo of what i need ?
 if it makes sense ??

Re: Golf Driver 1600cc 1990 carburator top cover ( airbox)

Reply #3 –
Sounds dumb but how can i dowload pics in here ? I have no clue ty

Re: Golf Driver 1600cc 1990 carburator top cover ( airbox)

Reply #4 –
i meant from my pc as all i can see is insert an image option and it doesnt's want to post? Thank you.

Re: Golf Driver 1600cc 1990 carburator top cover ( airbox)

Reply #5 –
To post a photo you have to save the photo on a hosting web site, then post the web link.

Re: Golf Driver 1600cc 1990 carburator top cover ( airbox)

Reply #6 –
Thank you very much ! I shall do this shortly,...

Re: Golf Driver 1600cc 1990 carburator top cover ( airbox)

Reply #7 –
I trust i did it right this time and hope you will be able to rest my mind on these small issues. Thanks again, Phil.
 

Re: Golf Driver 1600cc 1990 carburator top cover ( airbox)

Reply #8 –

Re: Golf Driver 1600cc 1990 carburator top cover ( airbox)

Reply #11 –
Note the metal clip holes the back piece to the top of carb. If you have a Weber, it bolts on to the carb through the small round hole. The front piece clips to the rear piece and the rubber bit bolts to a metal bracket

Re: Golf Driver 1600cc 1990 carburator top cover ( airbox)

Reply #12 –
thank you all, as i said all the pictures are from the hole part i bought on ebay as i needed a few compatible bits, not actually mine.
My car looks 100% as the photo you posted Keekster64. The second photo aslo from e-bay and noticed the rubber ring in it. Mine doesn't have it so it's normal as i got the orginial pietsburg cab as explained again by Keekster, thank you again !
Finally, i looked everywhere for the piece with the rubber that holds the front of the box ( picture 1 ). Where can i buy it if possible ???, i looked everywhere and ended getting picture 4. I guess i could always cut one side ?

Thanks again, Phil.