Skip to main content
Topic: Sump Gasket Upgrade. (Read 583 times) previous topic - next topic

Sump Gasket Upgrade.

Hi Guys.
Are there any decent sump gasket upgrades available. I've renewed my gasket like for like. All bolts are torqued up nice and the car has been stood for the duration of this pandemic. I start her every other day to get the oil to temp but after all these weeks it looks like its shedding a little tear again. What do you guys recommend?

Re: Sump Gasket Upgrade.

Reply #1
Your sump may not be flat.

Id opt to use a windage tray as that comes with a good rubber seal

Re: Sump Gasket Upgrade.

Reply #2
Not heard of one of them. Cheers I will look into it.

Re: Sump Gasket Upgrade.

Reply #3
what gasket did you fit? the rubberised version or the old paper/cork type?   only takes little bit of dirt in the sealing face to create a leak.. but you can and could use hylomar blue to create extra sealing properties, only small thin layer on gasket surface. 

Re: Sump Gasket Upgrade.

Reply #4
I've gone from original to rubber and back to OEM.

 

Re: Sump Gasket Upgrade.

Reply #5
Your sump may not be flat.

Id opt to use a windage tray as that comes with a good rubber seal

I got a windage tray, but never used in end as it could the crank. Only needs bit of fetling and would be fine.
Just check this before sealing back up.

That said it is available if interested.

Re: Sump Gasket Upgrade.

Reply #6
I will see how it goes once I've checked all the other options first. Thanks for the offer, I'll let you know👍