Re: CupraCraigs 20v Project Reply #15 – January 05, 2021, 06:27:50 PM Cracking project mate! Where did you get the bracket for the radiator fan, is it a custom effort?
Re: CupraCraigs 20v Project Reply #16 – January 06, 2021, 10:37:49 AM Quote from: turbo_wilson on January 05, 2021, 06:27:50 PMCracking project mate! Where did you get the bracket for the radiator fan, is it a custom effort?it was just a universal one on Ebay, the single fan is more than enough on these cars
Re: CupraCraigs 20v Project Reply #17 – January 29, 2021, 10:08:04 AM Tach adapter plumbed back in and runningIMG_20210104_214051 by Laxadams, on FlickrBraiding all the wires now:IMG_20210123_210731 by Laxadams, on FlickrMade a new foglight loom:IMG_20210124_220337 by Laxadams, on FlickrIMG_20210128_225600_858 by Laxadams, on Flickrcleaned out the brake fluid res, looks much better nowIMG_20210129_081804 by Laxadams, on Flickr
Re: CupraCraigs 20v Project Reply #18 – January 29, 2021, 12:32:50 PM Quote from: cupracraig on January 29, 2021, 10:08:04 AMTach adapter plumbed back in and runningIMG_20210104_214051 by Laxadams, on FlickrInterested in the tach adapter, is it suitable for a v5?
Re: CupraCraigs 20v Project Reply #19 – January 29, 2021, 12:38:03 PM Just another level with the wiring / braiding... amazing!
Re: CupraCraigs 20v Project Reply #20 – February 04, 2021, 01:40:06 PM Quote from: sly_gti on January 29, 2021, 12:32:50 PMQuote from: cupracraig on January 29, 2021, 10:08:04 AMTach adapter plumbed back in and runningIMG_20210104_214051 by Laxadams, on FlickrInterested in the tach adapter, is it suitable for a v5?I don't see why not, as long as your ECU has a tach signal output it just amplifies it for the dash. Quote from: L90E on January 29, 2021, 12:38:03 PMJust another level with the wiring / braiding... amazing!Thanks, most of the engine loom and light loom has been done, so it looks really good and protects it well
Re: CupraCraigs 20v Project Reply #21 – February 04, 2021, 01:41:54 PM The engine bay is looking nice and neat nowIMG_20210129_172948_780 by Laxadams, on FlickrIMG_20210129_175849_302 by Laxadams, on FlickrI installed the dash yesterday and started to run the internal loom through the gapsIMG_20210203_181508_799 by Laxadams, on Flickr
Re: CupraCraigs 20v Project Reply #23 – February 08, 2021, 02:16:42 PM Quote from: Monkey on February 04, 2021, 03:55:33 PMThat looks fantastic!cheers dude, cant wait to drive it again. Hopefully i can comve visit you and pick your brains on Diffs!I did a few more bits over the weekend.I ran the lighting / fan power / altenator trigger wire looms through the chassis leg and connected them upI had a look at the indicator loom and decided that i wanted to run it from inside the car, so rather than change it, i just made a brand new loom.IMG_20210205_174119 by Laxadams, on Flickrbit of a loom making selfie so some of you can put a face to the name:IMG_20210205_164222 by Laxadams, on Flickri've also ordered a load of LED bulbs to replace the older style ones, so everything will be LED bar the headlight and fog light bulbs as having a strong white light from those i feel would look out of place 1 Likes
Re: CupraCraigs 20v Project Reply #24 – February 08, 2021, 08:19:48 PM No worries, I may pick your brains on looms!
Re: CupraCraigs 20v Project Reply #25 – February 15, 2021, 02:47:33 PM Not much visual progress but...i took the dials an did a refurbishment on them.Guages are all working as expected.New / additional temp sender ordered so both MFA and VDO's report on oil temp.too cold on the weekend to work on it any moreIMG_20210214_132028 by Laxadams, on Flickr
Re: CupraCraigs 20v Project Reply #26 – February 16, 2021, 03:55:19 PM They look great!Did you paint them?
Re: CupraCraigs 20v Project Reply #27 – February 17, 2021, 02:50:49 PM Quote from: Monkey on February 16, 2021, 03:55:19 PMThey look great!Did you paint them?Yeah just masked them up, rubbed down with some 400 grit and then primed and painted.i have seen that you can buy brand new ones and just to add to the general clean look of the car i might buy a set. I could make up another loom for these and sell as a nice working set 1 Likes
Re: CupraCraigs 20v Project Reply #28 – February 24, 2021, 11:22:16 AM Needed to escape into the garage last night, so wacked this new light loom up, braided it and made it detachable with an OEM connection. that way if i ever have an issue with the LED bulb, i can just disconnect it and make changes simply. The led's are linked upto the lighting loom and are dimmable on the light switchIMG_20210223_163144 by Laxadams, on FlickrIMG_20210223_170640 by Laxadams, on FlickrIMG_20210223_171826 by Laxadams, on Flickr 2 Likes
Re: CupraCraigs 20v Project Reply #29 – February 25, 2021, 02:06:07 PM Is it wrong to get excited when you see such good wiring?
Topic: CupraCraigs 20v Project (Read 4974 times)
previous topic - next topic
