Skip to main content
Topic: Polybush Top Mounts (Read 1447 times) previous topic - next topic

Re: Polybush Top Mounts

Reply #15
don't happen to have the part number for the larger ones do you?

Re: Polybush Top Mounts

Reply #16
I now know they have to be the 105mm ones, but the mind boggles at the shear amount of different ones available.

Re: Polybush Top Mounts

Reply #17
Wind back to reply#11.
All the details are in the Club GTI post.
1H0412341 is the part number of the spring plates.

B&B on ebay probably sell the other stuff. Found their service to be gr8 with super speedy delivery.

There''s different opinions on whether the car sits higher at the front. Mine was slightly "nose-up" to begin with so I put my eibach springs back on the front. Not sure if I will keep it like that tho!
1991 Tornado Red BB 8v GTI Moredoor
2008 Skoda Octy Scout aka dirty diesel

Re: Polybush Top Mounts

Reply #18
Ok cheers, will go to VW and see what they have to say with that number

When you put it into Google, loads of different types appear,

Re: Polybush Top Mounts

Reply #19
Yes me too. Put it in eBay and I'm sure they are more expensive than the VW dealers. I put "vr6 front spring top" and just seen these although it doesn't say the diameter which I think needs to be 110mm.

FK 10mm lower

Good luck.
1991 Tornado Red BB 8v GTI Moredoor
2008 Skoda Octy Scout aka dirty diesel